STEP 1 Install OneTouch™ Software.

Install OneTouch™ Software on your computer following the instructions provided in the OneTouch™ Diabetes Management Software User’s Manual.

STEP 2 Connect the LifeScan

Interface Cable.

Connect the LifeScan Interface Cable to a serial port on the back of your computer. With the meter turned on, connect the LifeScan Interface Cable to the data port located on the upper left side of the meter. Be sure the cable plug is inserted all the way. will appear on the display once the first command is received, indicating that the meter is in the communication mode. You are now ready to transfer all test results—with date and time—stored in the meter memory to your computer.

Note: While in the communication mode, you will be unable to perform a blood glucose test.

119