Lifescan UltraSmart until the confirmation window is full before the meter begins to count down

Hold the blood drop to the top edge of the test strip until the confirmation window is full before the meter begins to count down.

If the confirmation window does not fill completely before the meter begins to count down, do not add more blood to the test strip; discard the test strip and retest. If you have trouble filling the test strip, contact your local LifeScan Customer Service office. See back cover for contact information.

If the confirmation window is not full, you may get an error message or an inaccurate test result.

Good	Sample
Sample	Too Small

Note: If you do not apply a blood sample within three minutes, the meter will turn off automatically. Remove the test strip and then insert it back into the meter to turn the meter back on.

31