Lifescan UltraSmart STEP 1 Enter the Code Mode, CAUTION:, Coding the Meter

Coding the Meter

Code numbers are used to calibrate the OneTouch® UltraSmart™ Meter with the OneTouch® Ultra™ Test Strips for accurate results. You must code the meter before using it for the first time and then every time you change to another vial of test strips. Each time you test, check to be sure that the code number on the meter display matches the code number on the test strip vial.

CAUTION: Failure to code the meter correctly will cause inaccurate test results.

STEP 1 Enter the Code Mode.

Insert a OneTouch® Ultra™ Test Strip to turn on the meter. Push it all the way in until it will go no further. “OneTouch UltraSmart” will appear on the display briefly.

10