Lincoln Electric IM546 manual 2INSTALLATION, Safety Precautions, Identify and Locate Components

A-2INSTALLATION

Read entire installation section before starting	FIGURE A.1
installation.

SAFETY PRECAUTIONS

WARNING

ELECTRIC SHOCK can kill.

1 2

• Only qualified personnel should perform this installation.

• Only personnel that have read and under- stood the WELD-PAK 100 Operating Manual should install and operate this equipment.

• Machine must be plugged into a receptacle which is grounded per any national, local or other applicable electrical codes.

• The WELD-PAK 100 power switch is to be
in the OFF (“O”) position when installing
work cable and gun and when connecting	4
power cord to input power.

3

IDENTIFY AND LOCATE

COMPONENTS

If you have not already done so, unpack the Weld-Pak 100 from its carton and remove all packing material around the WELD-PAK 100. Remove the following loose items from the carton (see Figure A.1):

1.WELD-PAK 100

2.Gun and cable assembly(1)

3.Literature and miscellaneous including:

a)This operating manual

b)10 extra .035" contact tips

c)Hex key wrench for removal of drive roll.

4.10 ft (3,0 m) work cable.

5.Work clamp.

6.Sample 10 lb. spool of Innershield .035" (0,9 mm) NR-211-MP electrode.

7.Handshield with filter plate and lens.

8.Instructional video.

9.8” Spool Adapter (2” Spindle) for mounting 10 lb. Spools

10.Chipping hammer/wire brush

For available options and accessories refer to the Accessories Section of this manual.

(1)The gun is ready to feed 0.035" (0,9 mm) Innershield wire.

56

78

910

WELD-PAK 100 JAN96