Return to Section TOC
Return to Master TOC
TROUBLESHOOTING AND REPAIR | |||
|
| ||
WIRE DRIVE MOTOR AND GEAR BOX REMOVAL AND REPLACEMENT | |||
| PROCEDURE (Continued) |
| |
| REMOVAL OF THE DRIVE | REMOVAL OF THE GEAR BOX |
|
| MOTOR FROM THE GEAR BOX | FROM THE MOUNTING PANEL. |
|
Return to Section TOC
Return to Section TOC
Return to Master TOC
Return to Master TOC
1.Using the 7/16 in. wrench remove the cover from the gear box. See Figure F.7. note the LF72 only has one screw.
2.Loosen and remove the outer wire guide.
3.Loosen and remove the drive roll assembly. The LF72 has one while the LF74 has three.
4.Using the Phillips head screw driver remove the gear drive. See Figure F.7.
5.Using the phillips head screw driver remove the three screws holding the drive motor. See Figure F.7.
6.Follow the first five steps found in the drive motor removal.
7.Using the 7/16 wrench remove the four bolts holding the gear box to the panel.
Return to Section TOC
Return to Master TOC
