![](/images/new-backgrounds/1176447/176447143x1.webp)
TOC
TOC
TROUBLESHOOTING & REPAIR
STATOR/ROTOR REMOVAL AND REPLACEMENT (continued)
12.Slide a short length of 2 X 4 under the engine to support it when the stator is removed.
13.With the 1/2” socket wrench, remove the 2 nuts that hold the stator end bracket support. See Figure F.10 for location. There are 2
14.With the 7/16” socket and 7/16” end wrench, remove the 4
15.Lift up the stator and slide out the sup- port bracket. The engine will now rest on the 2 X 4.
16.With the babbitt/leather/wooden mallet, tap off the end bracket. Alternate sides as you tap; watch the bearing to judge the amount of movement you’re getting.
17.Once the end bracket is off, carefully pull off the stator. IMPROPER HANDLING OF THE STATOR CAN RESULT IN SHORTED WINDINGS AND/OR LOST OUTPUT.
Return
Return to Section TOC
Return to Section TOC
Return
Return to Master TOC
Return to Master TOC
FIGURE F.10 – STATOR END BRACKET SUPPORT AND THRU-BOLTS
THRU-
BOLTS
THRU-
BOLTS
SUPPORT | NUTS |