English Manual
LINDY KVM Extender C5 PRO-300 Installation and Use page 22
4 As appropriate, press either the R,
G or B keyboard keys to select the
appropriate colour channel. The
corresponding keyboard indicators
will flash rapidly to show which
channel is currently selected for
adjustment: Num Lock for Red,
Caps Lock for Green and Scroll
Lock for Blue.
5 Press the
CURSOR LEFT
and
RIGHT
and keys to retard or
advance the timing of the selected
colour channel respectively. On screen you will see a change in the position of the selected colour crosses
in relation to the other two.
6 When the selected colour crosses are correctly positioned, press <RETURN> to exi t that colour channel.
The keyboard indicators will return to flashing in sequence.
7 If required, repeat steps 4 to 6 to select and adjust any colour channel until the vertical lines of t he red,
green and blue crosses are all aligned.
8 When all colours are correctly aligned,
press <RETURN> to exit configuration
mode and permanently save all settings.
Note: Once you have made a skew adjustment, it may be necessary to re-adjust the image controls to attain an optimum screen image.
5.9 Miscellaneous settings
The following are configuration settings within the modules that are not covered in ot her sections of
this guide. These can be achieved once within configuration mode by pressing the indicated keys:
Report Extender C5 firmware version - <F> <1> <RETURN>
Before initiating this command, ensure that the system is running an application that can displ ay
typed keys as screen characters - e.g. a word processor or Windows Notepad. The current firmware
version will be written to the application in the form of the letter ‘V’ followed by three numbers - for
example V201 means version 2.01.
Reset all configuration options to default states – <F> <8> <RETURN>
Returns all user configurable options to the settings that are installed at manuf acture. The password
will be cleared; however, the current video compensation setting will not be reset.