Linksys EFG80 manual Instant GigaDriveTM Series

Instant GigaDriveTM Series EtherFast® Network Attached Storage

Figure 4-6

IP Address. Set the Instant GigaDrive’s IP Address here, making sure that it is on the same LAN segment as the PC running the Setup Wizard.

Subnet Mask. The Subnet Mask must match the other devices on your network. It is set by default to 255.255.255.0.

Default Gateway. The value is left blank by default. If you have a router on your network, however, enter its IP Address here.

6.From the next screen, shown in Figure 4-7, you can set the Instant GigaDrive™ as your network’s DHCP server if no other device is function- ing as a DHCP server on your network. If you wish to use the Instant GigaDrive™ as a DHCP server, click the box next to Enable DHCP Server. Then, enter the range of IP Addresses you want to assign on your network. The first three Start and Finish fields must match the Instant GigaDrive’s IP Address with the final fields ranging from 2 to 250.

Click the Next button on the right to proceed or the Back button to return to the previous screen.

Figure 4-7

7.From the next screen, Figure 4-8, you can change the time and date on the Instant GigaDrive™.

Figure 4-8

13 14