Linksys EFG80 manual Lan, Beeper Codes

Instant GigaDriveTM Series

	Figure 2-2
LAN	Green. This LED flashes when data is transmitted or
	received via the network.
Disk	Green. This LED flashes when the Instant GigaDrive’s hard
	drive is being accessed. It stays on during the self-test.
Disk Full	Green. This LED lights up when the Instant Gigadrive™
	has reached its maximum storage capacity.
Backup	Green. This LED flashes when the Instant Gigadrive’s back-
	up utility is active.

EtherFast® Network Attached Storage

Beeper Codes

The Instant GigaDrive™ has an internal beeper that beeps to indicate certain events.

1	Beep	This signals that the Reset button or Power switch has been
		pressed.
2	Beeps	Repeated every five seconds for one minute, this signals that
		the Instant GigaDrive™ is configured as a DHCP client, but
		no DHCP server responded to the DHCP client’s request.
3	Beeps	Repeated every 15 seconds for three minutes, this signals
		that the Instant GigaDrive’s hard disk usage exceeds 98%
		capacity.
5	Beeps	Repeated every 15 seconds for three minutes, this signals
		that the Instant GigaDrive™ is overheating. An automatic
		shutdown will be performed three minutes after the first
		beep.

5 6