Linksys PSUS4 manual Printer Tab Logical Port

PrintServer for USB with 4-Port Switch

The Printer Tab - Logical Port

The Logical Printers tab contains the logical printer settings of the PrintServer. Select from the following fields for each Logical Printer. (See Figure 6-6.)

Select Printer. Select the number (1-3) from the drop-down menu of Logical Printer Port No: you wish to configure. Click the Get Data button to update the display with the current data for the selected logical printer.

Details

•Pre-string (Hex). Enter the printer control string (in hexadecimal characters) to be sent to the printer before each print job. This string cannot exceed 30 characters.

•Post String (Hex). Enter the printer control string (in hexadecimal characters) to be sent to the printer after each print job. This string cannot exceed 30 characters.

•Convert LF to CR+LF. If checked, LF (line feed) characters are changed to CR+LF (carriage return + line feed).

Change these settings as described here and click the Save button to apply your changes or click Cancel to cancel your changes.

Chapter 6: Configuring the PrintServer

Figure 6-6: Logical Port

20

The Printer Tab - Internet Printing