Wireless-G Ethernet Bridge with 5-Port Switch

Wireless Status

The Status screen displayed the Bridge’s current status and settings. All information is read-only.

Device Name - The name you have assigned to the Bridge is displayed here.

Firmware Version - The version number of the Bridge’s firmware is displayed here.

MAC Address - The MAC Address of the Bridge is displayed here.

LAN Settings

IP Address - The Bridge’s IP Address is displayed here.

Subnet Mask - The Bridge’s Subnet Mask is displayed here.

Gateway - The Gateway address for the Bridge is displayed here.

Statistics

Ethernet TX - The number of packets transmitted to the Ethernet network is displayed here.

Ethernet RX - The number of packets received from the Ethernet network is displayed here.

Wireless TX - The number of packets transmitted to the wireless network is displayed here.

Wireless RX - The number of packets received from the wireless network is displayed here.

Wireless Settings

SSID - The Bridge’s SSID is displayed here.

Network Type - The Bridge’s mode is displayed here.

Channel - The Bridge’s channel setting is displayed here.

WEP/WPA- The status of the Bridge’s security is displayed here.

TX Rate - The Bridge’s transmission rate is displayed here.

Link Quality - The quality of the Bridge’s connection is displayed here.

Chapter 7: Using the Wireless-G Ethernet Bridge Web-based Utility

Figure 7-22: Wireless Status Tab

40

Wireless Status

Page 46
Image 46
Linksys WET54GS5 manual Wireless Status, LAN Settings, Statistics, Wireless Settings