Installation & Operation Manual
11 Operating information (continued)
Status Display Screens (cont’d)
By using the Previous/Next (, ) arrow keys on the SMART SYSTEM display panel, you can navigate through the eight (8) display screens. Each screen will contain two (2) viewable items. The following is a description of the individual items and what they can display:
Screen | Display shows: | Description | |
| DHW PUMP: OFF | The control has not received a DHW call for heat and has not | |
| powered the DHW pump. | ||
|
| ||
|
|
| |
| ON | The control has received a DHW call for heat and has powered the | |
| DHW pump. | ||
#7 |
| ||
|
| ||
Delay | The DHW call for heat has been satisfied and the DHW pump is | ||
| |||
| running for a fixed time to remove any residual heat. | ||
|
| ||
|
|
| |
| The control will display a | ||
| Management System (BMS) connected to the unit. | ||
|
| ||
|
|
|
Press the Next arrow key on the SMART SYSTEM display to access Screen #8.
#8
SYS PUMP: OFF | The control has not received a call for heat from a remote thermostat | |
and has not powered the system pump. | ||
| ||
|
| |
ON | The control has received a call for heat from a remote thermostat and | |
has powered the system pump. | ||
| ||
|
| |
Delay | The system call for heat has been satisfied and the system pump is | |
running for a fixed time to remove any residual heat. | ||
| ||
|
| |
| The control has either not received a call for heat from a remote | |
| thermostat, a remote thermostat is not connected to the unit and the | |
BLR PUMP: OFF | water temperature has not dropped below the temperature set point | |
| of the control to initiate a call for heat, or the control has received a | |
| DHW call for heat from a DHW thermostat. | |
|
| |
| The control has received a call for heat from a remote thermostat or a | |
ON | remote thermostat is not connected and the water temperature has | |
dropped below the temperature set point of the control to initiate a | ||
| ||
| call for heat. | |
|
| |
Delay | The call for heat has been satisfied and the boiler pump is running for | |
a fixed time to remove any residual heat. | ||
| ||
|
|
Press the Next arrow key on the SMART SYSTEM display to access Screen #9.
65