Installation & Operation Manual
7 Operating information (continued)
Copper-fin2 control module
Use the control panel (FIG.
Figure 7-1_Control Panel - Operator Interface
• Hold 5 seconds to enter code |
| • Press to turn heater off or back on | ||||
Input Mode (Menu Mode) |
| |||||
• Press to move up one level |
| • Press to select a menu item | ||||
in Menu Mode or to exit |
| • Press after parameter programming | ||||
Menu Mode |
| to store parameter data | ||||
|
|
|
| • Press to exit Service Mode | ||
MENU/EXIT | DISPLAY SCREEN | ENTER/RESET | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
UPDOWN
•Press to change boiler water temperature and/or tank water temperature set point during normal operation
•Press to change displayed data values in Menu Mode
•Press to navigate through menu listing in Menu Mode
PREVIOUS NEXT
•Press to toggle display during normal operation to show outlet and return temperatures, fan speed, flame signal, etc.
•Press to toggle between digits when entering access code or between hour, minutes, etc., when entering date and time
•Press and hold both to enter Service Mode
53