Lowrance electronic X52, X59DF manual 121, Hole Diameter, Inches 112 Cut on line

Before positioning the bracket, be sure to hold the cables against the rear edge of the hole. Then, slide the bracket over the hole and butt the rear of the bracket base firmly against the cables, thus pinning them in place against the side of the hole. Finally, fasten the bracket to the dash. Attach the unit to the gimbal bracket using the supplied gimbal knobs and washers.

In-Dash Installation

You can mount the unit in the dash with an optional FM-4 In-Dash Adapter Kit. The kit includes mounting hardware, a template for cutting the hole and an instruction sheet, part 988-0147-44.

121

[4.76]

Top

47
[1.85]	In-Dash
	Template
Hole
diameter	Millimeters
3.5
	[Inches]	112
[0.14]
		[4.40]

Cut on line

ALWAYS VERIFY DIMENSIONS

R 6.35

[0.25] 119

[4.68]

In-dash mounting template for X52 and X59DF sonars, showing

dimensions. NOTE: The figure above is not printed to scale. A scaled

template is available for free download from our web site,

www.lowrance.com.

Portable Installation

Like many Lowrance products, this sonar unit is capable of portable operation by using an optional portable power pack. The power pack and an optional portable transducer expand the uses for your sonar unit. The power pack makes it easy to use the unit on your boat or take 28