This unit has reverse polarity protection. No damage will occur if the power wires are reversed. However, the unit will not work until the wires are attached correctly.
An optional
NMEA 2000 Cable Connections
NMEA 2000 is a new buss network specifically designed for boats. This is a very young industry standard and, at the time of printing, few boats being built now have a NMEA 2000 buss installed. Over the next few years, however, NMEA 2000 will become much more common. To help you get the most out of this technology, your Lowrance unit is designed to work with a NMEA 2000 network as soon as it becomes available.
Connecting to a NMEA 2000 Network
Your unit can be connected to a NMEA 2000 buss, receiving sensor information from any Lowrance units attached to the buss. Contact LEI Extras (look inside back cover for accessory ordering information) for a NMEA 2000 buss adapter cable if you would like to do this. Simply attach the adapter cable's manual locking collar connector to the Network port on the back of the sonar unit and attach the other end to an available port on the NMEA 2000 buss, as shown in the following image.
To NMEA 2000 | To sonar |
network port | unit's Network |
| socket |
Lowrance unit direct connection to NMEA 2000 buss.
As soon as the unit is connected to the network, it will begin receiving shared information. Please note that the buss must be powered to operate. (For more on powering a NMEA 2000 buss, see the instructions earlier in this section.)
NMEA 0183 Cable Connections
NMEA is a standard communications format for marine electronic equipment. Your sonar unit cannot currently communicate with a NMEA 0183 network, so the Data cable wires will not be used. To prevent an electrical short, we recommend capping all unused, exposed wire ends with wire nuts or electrical tape and tucking the excess cable out of the way.
24
