Lowrance electronic X59DF, X52 manual Power connections for the units in this series

Blue connector
To power a	To unit
NMEA 2000
buss, also
connect
NMEA 2000
Power cable
to the boat's
battery.

White external speaker wire (not used by this unit)

Black wire

Optional power off
switch for salt-	12 volt
water installations	battery

Red wire with

3 amp fuse

NMEA 0183 NMEA 2000 Power Cable

Data Cable

Power connections for the units in this series.

NOTES:

If you're powering a NMEA 2000 buss, you will attach both the NMEA 2000 Power cable and the unit's Power Supply cable to the boat's battery. To attach the NMEA 2000 Power cable, connect the red wire to battery's + and black and shield wires to battery's –.

If you are not powering a NMEA 2000 buss, we recommend capping all unused, exposed wire ends with wire nuts or electrical tape and tucking the excess cable out of the way. This will prevent an electrical short.

WARNING:

This product must be independently fused with the enclosed 3-amp fuse (or equivalent), even if you connect to a fused accessory or power buss.

If a malfunction happens inside the unit, extensive damage can occur if the enclosed fuse is not used. As with all electrical devices, this unit could be damaged to a point that it is unrepairable and could even cause harm to the user when not properly fused.

CAUTION:

Do not use this product without a 3-amp fuse wired into the power cable! Failure to use a 3-amp fuse will void your warranty.

23