
BIOS Boot Error Messages
Message | Problem | Suggested Solution |
Adapter BIOS Disabled. | The MegaRAID BIOS is | Enable the BIOS via the |
No Logical Drives | disabled. Sometimes the | MegaRAID Configuration |
Handled by BIOS | BIOS is disabled to | Utility utility. |
| prevent booting from the |
|
| BIOS. |
|
Host Adapter at Baseport | The BIOS cannot | Make sure MegaRAID is |
xxxx Not Responding | communicate with the | properly installed. |
| adapter firmware. | Try moving the |
|
| |
|
| MegaRAID card to |
|
| another PCI slot. |
|
| Run the MegaRAID |
|
| Manager Diagnostics to |
|
| verify that MegaRAID is |
|
| functioning properly. |
No MegaRAID Adapter | The BIOS cannot | Make sure MegaRAID is |
| communicate with the | properly installed. |
| adapter firmware. | Move the MegaRAID |
|
| |
|
| card to another PCI slot. |
|
| Run the MegaRAID |
|
| Manager Diagnostics to |
|
| verify that MegaRAID is |
|
| functioning properly. |
Configuration of | The configuration stored | Press a key to run |
NVRAM and drives | in the MegaRAID adapter | MegaRAID Manager. |
mismatch. | does not match the |
|
Run View/Add | configuration stored in the | Choose View/Add |
Configuration option of | drives. | Configuration from the |
Configuration Utility. |
| Configure menu. |
Press any key to run the |
| Use View/Add |
Configuration Utility. |
| |
|
| Configuration to examine |
|
| both the configuration in |
|
| NVRAM and the |
|
| configuration stored on |
|
| the disk drives. Resolve |
|
| the problem by selecting |
|
| one of the configurations. |
Chapter 8 Troubleshooting | 109 |