Step 1 Unpack

Unpack and install the hardware in a static-free environment. The MegaRAID controller card is packed inside an anti-static bag between two sponge sheets. Remove the controller card and inspect it for damage. If the card appears damaged, or if any of items listed below are missing, contact LSI Logic Technical Support at 678-728-1250. The MegaRAID Controller is also shipped with the following items that are on CD:

the MegaRAID Configuration Software Guide

the MegaRAID Operating System Drivers Guide

the MegaRAID Enterprise 1600 Hardware Guide

the software license agreement

the MegaRAID Configuration Utilities for DOS

the warranty registration card

Step 2 Power Down

Turn off the computer and remove the cover. Make sure the computer is turned off and disconnected from any networks before installing the controller card.

Step 3 Configure Motherboard

Make sure the motherboard is configured correctly for MegaRAID. MegaRAID is essentially a SCSI Controller. Each MegaRAID card you install will require an available PCI IRQ; make sure an IRQ is available for each controller you install.

50MegaRAID Enterprise 1600 Hardware Guide