
Step 8 Connect Battery Pack (Optional)
There are two ways to install a battery pack onto the Series 471 MegaRAID Enterprise 1600 160M RAID controller. The first way is to use a DIMM with a battery backup attached to it.
The battery pack is shown in the bottom view of the DIMM socket below. Pin 1 on the cable from the battery pack is usually denoted by a red wire. The caution information appears on the battery module as shown below.
J23Battery Connector Pinout
| Pin | Description |
|
| 1 | VBAT1+ (red wire) |
|
| 2 | TSENSE (white wire) |
|
| 3 | VBAT- (black wire) |
|
| 4 | BATDQ |
|
| 5 | Ground |
|
|
|
|
|
Cont’d
62MegaRAID Enterprise 1600 Hardware Guide