SCSI Termination, Continued

Terminating External Disk Arrays In most array enclosures, the end of the SCSI cable has an independent SCSI terminator module that is not part of a SCSI drive. In this way, SCSI termination is not disturbed when a drive is removed. MegaRAID termination should always be enabled or controlled by software. Make sure J2, J3, J5, and J7 are either always open (termination always enabled), or Pins 1-2 are shorted (termination controlled by software).

Note: Channels C and D have only external connectors, so termination should always be either anabled or under software control on these two channels.

58MegaRAID Enterprise 1600 Hardware Guide