Lucent Technologies 4.1 manual Form C Supplemental Instructions Button Templates

Models: 4.1

1 39
Download 39 pages 54.53 Kb
Page 10
Image 10

Form C Supplemental Instructions:

8

Button Templates

 

 

 

There are eight pages to Form C—onepage for each type of system phone and one page for an Intercom Autodialer. Use Form C to record line and pool button assignments and to indicate programming for system telephone buttons that do not have lines or pools assigned if the programming is to be performed from extension 10 or 11 during system installation. After installation, users can program additional features using the instructions on their Quick Reference cards.

A telephone button can be programmed as a line button (to access an outside line), as a pool button (to access a pool), as an Auto Dial button (to dial a phone number or a PBX/Centrex feature access code with one touch), or as a dial-code feature button (to access a dial-code feature with one touch). Line and pool buttons must have status lights; some features also require buttons with lights (see "Button Feature Summary").

Using the information from Line Ringing and Line/Pool Access Restriction on Form B2, fill out Form C as follows:

MLS-34D Telephone

21

22

23

24

17

18

19

20

13

14

15

16

9

10

11

12

5

6

7

8

1

2

3

4

MLS-18D, MLS-12D, and MLS-12 Telephones

13

14

15

16

9

10

11

12

5

6

7

8

1

2

3

4

NOTE: On MLS-12D and MLS-12 telephones, only buttons 1 through 10 have lights and can have lines assigned.

Make as many copies of each page of Form C as you need. Where line, pool, and other button assignments are identical for two or more phones of the same type, you can use one copy of the form and indicate the extension numbers sharing the programming in the space provided at the bottom of the form.

Use either the button template (to record the exact location of buttons and the programming assigned to them) or the Check Desired Features checklist (to identify features to be programmed), or both. By default, lines are assigned to buttons in the following order:

PARTNER-34D Telephone

21

22

23

24

 

 

17

18

19

20

 

 

13

14

15

16

 

 

7

8

9

10

11

12

1

2

3

4

5

6

MLS-6 Telephone

1

2

3

4

In Hybrid mode, the main pool (880) is assigned to the two leftmost buttons on the bottom row (shown with on Button Template forms) of all pooled extensions; the location of these buttons cannot be changed. However, the main pool can be removed from extensions, in which case the buttons are available for other line, pool, Auto Dial, or dial-code feature assignments.

Lines also can be assigned to auxiliary pools (881, 882, or 883) and these auxiliary pools can be assigned to any buttons with lights.

Indicate the order in which a line or pool is selected when the user lifts the handset or presses Spkrto place a call without first pressing a line or pool button (Automatic Line Selection) if the order is to be different than the default (key extensions: outside lines in ascending numerical order followed by intercom; pooled extensions: main pool button 1, button 2, intercom).

PARTNER-18D and PARTNER-18 Telephones

13

14

15

16

9

10

11

12

5

6

7

8

1

2

3

4

PARTNER-6 Telephone

34

12

Page 10
Image 10
Lucent Technologies 4.1 manual Form C Supplemental Instructions Button Templates