Lucent Technologies 4.1 manual Form C6 MLS-18 Phone, Identify extensions programmed as shown

Lucent Technologies

Bell Labs Innovations

Form C6: MLS-18 Phone

Make as many copies as you need. Use template and/or checklist. For additional instructions, see page 8.

Check Desired Features

PAGE 6 of 8

Template Instructions

SAMPLE

Also write in extension or group number

Automatic System Answer Button {#111}1	ASA
Direct Extension Dial Button {#113}1	DXD

●If desired, write in line number, pool access code, dial code feature, or auto dial number

●If desired, write in Line Ringing (Imm, Del, or No) from Form B2

●If desired, write in Line Access Restriction or Pool Access Restriction (Out, In, or No) from Form B2

Intercom Intercom

Ext.

*For PARTNER II systems in Hybrid mode only, if pool 880 is assigned, these two buttons are associated with this pool.

Specify Automatic Line Selection:

Identify extensions programmed as shown:

Night Service Button {#503}			NightSvc
Outgoing Call Restriction Button {#114}2			OCR
Wake Up Service Button {#115}			Wake
Caller ID Inspect (F 17)1			lD-Inspect
Caller ID Name Display (F 16)1			ID-Name
Do Not Disturb (F 01)			DND
Privacy (F 07)				Priv
VMS Cover (F 15)			VMSCover
Voice Interrupt on Busy Talk-Back (F 18)			VIOB
Account Code Entry (F 12)3			ACE
Background Music (F 19)3			Music			1. PARTNER
							II system
Call Coverage (F 20 XX XX)1,3,5			Cover-XX	XX
							only.
Call Forwarding/Call Follow-Me (F 11 XX XX)3,5 CF-XX				XX	2.		Requires
							Auto Dial
Call Park (I XX)	4		Park
							button for
Call Pickup (I 6 XX)			Pickup-XX				each
							extension.
Conference Drop (F 06)			Drop		3.
							Button with
Direct Line Pickup-Active Line (I 68)			DLPA				lights is
							recom-
Direct Line Pickup-Idle Line (I 8)			DLPI
							mended, but
Exclusive Hold (F 02)			ExHold		4.		not required.
							Extension
Fax Management (I XX)		3	FAX-XX
							number can
Group Calling-Ring/Page (I 7 G or I *7 G)			GCall-g				be pro-
							grammed
Group Hunt-Ring/Signal (I 77 G or I *77 G)			Hunt-g
							as Auto Dial
Group Pickup (I 66 G)			P/U Grp-g				button.
Intercom Autodial (I XX or I *XX)3			Ext-XX		5.		You can
							program the
Last Number Radial (F 05)			LNR
							origination
							extension
Loudspeaker Paging (I 70)			Loudspk
							only or both
Manual Signaling (F 13 XX or F 13 * XX)3			MS-XX				the
							origination
Message Light Off (F 10 XX)6			MsgOff-XX
							and
Message Light On (F 09 XX)6			MsgOn-XX				destination
							extension.
Recall (F03)			Recall
						6.	You can
Save Number Radial (F 04)			SNR
							program the
							extension
Simultaneous Paging (I * 70)			SPage
							number.
Station Lock (F 21)3			Lock
Touch-Tone Enable (F 08)			TT-EN
Voice Mail Messages Button (I 777)			VMMsgs-777
Voice Mailbox Transfer (F 14)			VMBox

F= Feature button G = Group I = Left Intercom button XX = Extension