12
Manual |
| ⎧Feat ⎫⎧1 ⎫⎧3 ⎫xx |
Beeps the designated extension. If the user presses ⎧ Intercom ⎫ first, pressing the button places a ringing intercom call to the extension, or transfers a call. If on a button with lights, the lights show calling activity at the destination extension.
Manual Signaling—Voice Signal 
MSVS-xx
Beeps the designated extension. If the user presses ⎧ Intercom ⎫ first, pressing the button places a
Dial-Code Features
Account Code Entry | ACE | ⎧Feat ⎫⎧1 ⎫⎧2 ⎫ |
Allows the user to enter an account code for a call by pressing the button, entering up to 16 digits for the account code, then pressing the button again. If on a button with lights, the lights show when the feature is in use.
Background Music | Music | ⎧ Feat ⎫⎧1 ⎫⎧9 ⎫ |
Turns background music on and off at the speaker of an idle system phone. If on a button with lights, the lights show when the feature is in use.
Call Coverage
Cover-xx xx ⎧ Feat ⎫⎧ 2 ⎫⎧ 0 ⎫ xx xx
(PARTNER II system only) Directs all intercom, transferred, and outside calls on lines assigned ownership to the designated extension. You may program originating and covering extension numbers on the button. If on a button with lights, the lights show when the feature is in use.
Call Forwarding/Call 
Forwards all calls to the designated extension. Unless Do Not Disturb is on, phone beeps once each time a call is forwarded. You may program originating and destination extension numbers on the button. If on a button with lights, the lights show when the feature is in use.
Call ParkPark ⎧ Intercom ⎫ xx
Parks a call at a specific extension so it can be picked up from any other extension.
Call Pickup | ⎧ Intercom ⎫⎧ 6 ⎫ xx |
Picks up a ringing or parked call at the designated extension.
Caller ID Inspect
lD-Inspect
(PARTNER II system only) When a user at a display phone is already on a call, this feature shows Caller ID information for another line (if Caller ID information is available on that line), without disconnecting the current call or putting it on hold. When the feature is active, the button light is on.
Caller ID Name Display |
| ⎧ Feat ⎫⎧1 ⎫⎧6 ⎫ |
(PARTNER II system only) When a user at a display phone is on a call on a line that has Caller ID information available, this feature lets the user switch between the caller’s telephone number (the default display) and the caller’s name (if available). When the feature is
Conference Drop | Drop | ⎧ Feat ⎫⎧0 ⎫⎧6 ⎫ |
Drops the last outside party added to a conference call.
Direct Line | DLPA | ⎧ Intercom ⎫⎧6 ⎫⎧8 ⎫ |
Allows the user to access a ringing, active, or held call on a line that is not assigned to the extension. Direct Line Pickup is subject to Line Access Restrictions programmed for the extension.
Direct Line | DLPI | ⎧ Intercom ⎫⎧8 ⎫ |
Allows the user to access an idle
Do Not Disturb | DND | ⎧ Feat ⎫⎧0 ⎫⎧1 ⎫ |
Prevents calls from ringing at the extension. When the feature is active, the button light is on. Intercom calls get a busy signal, and outside callers hear ringing. Use only if someone else answers the extension’s outside calls.
If VMS Cover and Do Not Disturb are both active, intercom, transferred, and outside calls on owned lines go directly to the extension’s voice mailbox. If Call Coverage and Do Not Disturb are both active, intercom, transferred, and outside calls on lines assigned ownership go directly to the covering extension.
Exclusive Hold | ExHold | ⎧ Feat ⎫⎧0 ⎫⎧2 ⎫ |
Places a call on hold and prevents other extensions with the line from picking it up.
Group | GCallP- |
| Intercom | ★ | 7 | g |
| g | ⎧ |
| ⎫⎧ | ⎫⎧ ⎫ |
|
Places a
Group | GCall- | g |
| Intercom | 7 |
| g |
|
| ⎧ |
| ⎫⎧ | ⎫ |
|
Places a ringing intercom call to all extensions in the designated Calling Group. The caller is connected to the first extension that answers. Also can be used to transfer a call to an extension in the group. g =
