Lucent Technologies 4.1 manual System Settings, Line Coverage, Dxd, Vms-Aa, Asa

9. System Settings

Receptionist answers calls during business hours?

If "Yes," be sure to record settings on these forms that will allow

the receptionist to answer the phone before automatic coverage is applied.

Number of Lines {#104}

This programming procedure should be used only for installation—using it later erases custom settings for all extensions. After installation, use Line Assignment {#301} to assign lines and, for PARTNER II systems only, Pool Extension Assignment {#314} to assign lines to pools.

Transfer Return Rings {#105}

The transfer return extension is identified on Form B1, Write Transfer Return Ext. No. {#306}.

Outside Conference Denial {#109}

To prevent all users from conferencing with more than one outside party, write "No" in the space provided.

Call Coverage Rings {#116}

(PARTNER II system only) Covered extensions are identified on Form A, Write Ext. No. for Call Cover {#208}.

VMS Cover Rings {#117}

This feature applies to all intercom calls, transferred calls (that is, outside calls transferred by VMS-AA and inside transferred calls), and outside calls on owned lines (those specified using Line Coverage Extension {#208}) for extensions that have VMS Cover or Automatic VMS Cover {#310} active.

Ring on Transfer {#119}

If Ring on Transfer is Not Active, callers hear silence unless Music on Hold is activated and an audio source is connected to the processor module.

Toll Call Prefix {#402}

If dialing a "0" or "1" to make long distance calls is not required, write "No" in the space provided.

System Password {#403}

Whoever knows the password can place any type of call at any time, regardless of dialing restrictions.

NOTE: If a System Password is programmed, it must be entered to turn Night Service on and off. Also, users at Night Service Group extensions must enter the password before placing outside calls—except Marked System Speed Dial numbers and numbers on the Emergency Phone Number List.

Music on Hold {#602}

If Music on Hold is Not Active or no audio source is connected, callers on hold hear silence.

10. Line Coverage

DXD

If DXD was specified in Item 8, you can change the number of times that the phone should ring before the system answers. You must specify the message callers hear when the system answers. Be sure to specify a Direct Extension Dial Button {#113} for extension 10 on Form C to activate this feature.

VMS-AA

If VMS-AA was specified in Item 8, you can change the number of times that the phone should ring before the voice messaging system answers. You also can specify that the system should answer only when Night Service is off (Day only) or when Night Service is on (Night only). If Day only or Night only is selected, be sure to specify a Night Service Button {#503} for extension 10 on Form C to activate this feature.

ASA

If ASA was specified in Item 8, you can change the number of times that the phone should ring before the system answers and indicate how the system should handle the call after the greeting plays. You must specify the message callers hear when the system answers. Be sure to specify an Automatic System Answer Button {#111} for extension 10 on Form C to activate this feature.

3