Lucent Technologies 4.1 manual Night only is desired

Form A: System Configuration

PAGE

Lucent Technologies

2 of 3

Required for PARTNER II System and PARTNER Plus System.

Bell Labs Innovations

For additional instructions, see page 3.

9. System Settings. Write response on line for each item.

VMS-AA:If VMS-AA is checked, specify the following:

●

Receptionist answers calls during business hours? Write "Yes" or "No"

.

VMS Hunt Delay {#506}—By default, VMS answers calls after 2 rings. Write "Del" if

●

Number of Lines {#104}—By default, 2 lines per 206 module and 4 lines per 400 module

calls ring 4 times before VMS answers

.

VMS Hunt Schedule {#507}—By default, VMS is on all the time. Check if Day only or

are assigned to each extension (or to pool 880 in PARTNER II Hybrid Mode). Write

number if different from default

.

Night only is desired:

● Transfer Return Rings {#105}—By default, a transferred call rings 4 times before going to

❑

Day only

❑

Night only

the transfer return extension. Write number (0-9, 0 = no return) if different from

default

.

ASA: (PARTNER II system only) If ASA is checked, specify the following:

Automatic System Answer Delay {#110}—By default, a call rings 2 times before it is

●

Outside Conference Denial {#109}—By default, a conference call can include 2 outside

answered by the system. Write number (0-9) if different from default

.

parties. Write "No" if 2 outside parties are not allowed

.

●

Call Coverage Rings {#116} (PARTNER II only)—By default, a covered call rings 2 times

Automatic System Answer Mode {#121}—By default, ASA calls are put on hold after the

.

greeting plays. Check if calls should continue to ring or be disconnected:

before going to the covering extention. Write number (1-9) if different from default

●

VMS Cover Rings {#117}—By default, a call rings 3 times before going to the user’s

❑

Ring

❑

Disconnect

mailbox. Write number (1-9) if different from default

.

●

Ring on Transfer {#119}—By default, the caller hears ringing when the call is transferred.

ASA Record/Playback (I 891)—message of up to 10 seconds that caller hears

when the call is answered by the Automatic System Answer feature. Write

Write "NA" if music on hold or silence is desired

.

●

Toll Call Prefix {#402}—By default, 0 or 1 must be dialed before the area code for a

message below and record from extension 10 or 11:

long distance call. Write "No" if 0 or 1 is not required

.

●System Password {#403}—By default, no password is programmed to override dialing restrictions and to turn Night Service on and off. Write 4 digits if password is desired __ __ __ __.

●Music on Hold {#602}—By default, the Music on Hold jack on the processor module is

active. Write "No" if the jack is deactivated .

10. Line Coverage. Complete items based on Line Coverage selection on Form A, Item 8. DXD: (PARTNER II system only) If DXD is checked, specify the following:

Direct Extension Dial Delay {#112}—By default, a call rings 2 times before it is

answered by the system. Write number (0-9) if different from default .

Direct Extension Dial Record/Playback (I 892)—message of up to 20 seconds that caller hears when call is answered with the Direct Extension Dial feature. Write message below and record from extension 10 or 11: