Lucent Technologies 4.1 manual Form C5 MLS-34D Phone

Lucent Technologies

Bell Labs Innovations

Form C5: MLS-34D Phone	5 of 8
	PAGE

Make as many copies as you need. Use template and/or checklist. For additional instructions, see page 8.

Check Desired Features

Also write in extension or group number

SAMPLE

Template Instructions

●If desired, write in line number, pool access code, dial code feature, or auto dial number

●If desired, write in Line Ringing (Imm, Del, or No) from Form B2

●If desired, write in Line Access Restriction or Pool Access Restriction (Out, In, or No) from Form B2

Ext.

Intercom Intercom

*For PARTNER II systems in Hybrid mode only, if pool 880 is assigned, these two buttons are associated with this pool.

Specify Automatic Line Selection:

Identify extensions programmed as shown:

Automatic System Answer Button {#111}1			ASA
Direct Extension Dial Button {#113}1			DXD
Night Service Button {#503}			NightSvc
Outgoing Call Restriction Button {#114}2			OCR
Wake Up Service Button {#115}			Wake
Caller ID Inspect (F 17)1			ID-Inspect
Caller ID Name Display (F 16)1			ID-Name
Do Not Disturb (F 01)			DND
Privacy (F 07)			Priv
VMS Cover (F 15)			VMSCover
Voice Interrupt on Busy Talk-Back (F 18)			VIOB
Account Code Entry (F 12)3			ACE
Background Music (F 19)3			Music	1.	PARTNER
					II system
Call Coverage (F 20 XX XX)1,3,5			Cover-XX XX
					only.
Call Forwarding/Call Follow-Me (F 11 XX XX)3,5 CF-XX XX				2.	Requires
					Auto Dial
Call Park (I XX)	4		Park
					button for
Call Pickup (I 6 XX)			Pickup-XX		each
					extension.
Conference Drop (F 06)			Drop	3.
					Button with
Direct Line Pickup-Active Line (I 68)			DLPA		lights is
					recom-
Direct Line Pickup-Idle Line (I 8)			DLPI
					mended, but
Exclusive Hold (F 02)			ExHold		not required.
				4.	Extension
Fax Management (I XX)3			FAX-XX
					number can
Group Calling-Ring/Page (I 7 G or I *7 G)			GCall-g		be pro-
					grammed
Group Hunt-Ring/Signal (I 77 G or I *77 G)			Hunt-g
					as Auto Dial
Group Pickup (I 66 G)			P/U Grp-g	5.	button.
Intercom Autodial (I XX or I *XX)3			Ext-XX		You can
					program the
Last Number Redial (F 05)			LNR		origination
Loudspeaker Paging (I 70)			Loudspk		extension
					only or both
Manual Signaling (F 13 XX or F 13 *XX)3			MS-XX
					the
Message Light Off (F 10 XX)		6	MsgOff-XX		origination
					and
Message Light On (F 09 XX)6			MsgOn-XX
					destination
					extension.
Recall (F 03)			Recall	6.
					You can
Save Number Redail (F 04)			SNR
					program the
					extension
Simultaneous Paging (I * 70)			SPage
					number.
Station Lock (F 21)3			Lock
Touch-Tone Enable (F 08)			TT-EN
Voice Mail Messages Button (I 777)			VMMsgs-777
Voice Mailbox Transfer (F 14)			VMBox

F = Feature button G = Group I = Left Intercom button XX = Extension