Lucent Technologies 4.1 manual Introduction, Identifying a System Manager, Customer Training

Models: 4.1

1 39
Download 39 pages 54.53 Kb
Page 3
Image 3

Introduction

Setup decisions for the PARTNER® II Communications System or PARTNER Plus Communications System should be recorded on the forms in this Planner. The forms must be filled out before installation to provide guidance for the technician who installs and programs the system.

The forms should also be used by the customer to record changes after installation, so there is an ongoing record of the programming for the system. If programming is inadvertently erased (for example, in the event of an extended power failure), the forms can be used to reprogram the system.

Identifying a System Manager

As part of the planning process, the customer should identify a person in the company to act as System Manager. The System Manager is the person who is responsible for the telephone system. The System Manager should work with you to fill out the forms, and should participate (with an alternate) in the training for the system. The System Manager can then provide training, answer questions for telephone users, and perform programming for the system after installation.

2.Provide advice to help the customer fill out any additional forms needed for installation.

If button features should be programmed onto users’ telephones cen- trally (instead of letting users do it themselves), the desired button programming should be specified using the appropriate telephone templates or feature checklists on Form C1 through Form C8.

If the customer plans to use dialing restrictions, Form D should be used to specify a list of Emergency Phone numbers that will override restrictions. Form D can also be used to specify lists of Disallowed and Allowed numbers to fine tune the dialing capabilities for individual extensions, to identify External Hotline phones that dial a specified telephone number as soon as the handset is lifted, and to specify up to 99 account codes for account code verification.

If the customer wants System Speed Dial numbers programmed that will be available to all system users, Form E should be filled out.

After the forms are completed, take the original and leave a copy with the customer.

Filling Out Planning Forms for the Customers

The planning forms were designed to be as self explanatory as possible. The first few times you fill out the forms, it may help to refer to the supplemental instructions on the pages that follow. For detailed information about system features, see the PARTNER II or PARTNER Plus Communications System Programming and Use guide.

We suggest you complete the forms as follows:

1 . Fill out Form A (to describe the customer’s overall system configuration) and Form B1 (to record basic information for each system extension).

If you want to customize extension settings for different users, complete Form B2 as well.

NOTE: For system options that require programming, the forms show the name of the procedure and the programming code in the form {#NNN} (for example, Line Assignment {#301}); centralized programming procedures for individual extensions are identified by the letters {CTP} for "Centralized Telephone Programming" (for example, Line Ringing {CTP}).

Customer Training

In the U.S., a Lucent Technologies representative will provide training at the customer’s place of business when the system is installed and programmed. (Outside the U.S., customers should contact their Lucent Technologies Repre- sentative or local Authorized Dealer for information about training.) The repre- sentative will demonstrate how to:

Handle calls and use system features

Program features and phone numbers onto phone buttons

Change the programming for the system and for individual telephones

Use the Quick Reference cards and the Programming and Use guide

To prepare for training, please tell the customer to:

Set aside approximately two hours of uninterrupted time for training on installation day, preferably in a quiet place away from distractions.

Designate one person (generally the System Manager) and an alternate to participate in the training. These persons will then train the rest of the company staff.

This training will ensure that the customer takes maximum advantage of their new Lucent Technologies system. Thank you for your cooperation.

1

Page 3
Image 3
Lucent Technologies 4.1 manual Introduction, Identifying a System Manager, Filling Out Planning Forms for the Customers