Lucent Technologies 4.1 manual Form C7 MLS-12 Phone

	Form C7: MLS-12 Phone
Lucent Technologies	Make as many copies as you need. Use template and/or checklist.
Bell Labs Innovations
	For additional instructions, see page 8.
	Check Desired Features

PAGE 7 of 8

Template Instructions

SAMPLE

Also write in extension or group number

Automatic System Answer Button {#111}1	ASA
Direct Extension Dial Button {#113)1	DXD

●If desired, write in line number, pool access code, dial code feature, or auto dial number

●If desired, write in Line Ringing (Imm, Del, or No) from Form B2

●If desired, write in Line Access Restriction or Pool Access Restriction (Out, In, or No) from Form B2

Intercom Intercom

Ext.

*For PARTNER II systems in Hybrid mode only, if pool 880 is assigned, these two buttons are associated with this pool.

Specify Automatic Line Selection:

Identify extensions programmed as shown:

Night Service Button {#503}				NightSvc
Outgoing Call Restriction Button {#114}2				OCR
Wake Up Service Button {#115}				Wake
Caller ID inspect (F 17)1				ID-Inspect
Caller ID Name Display (F 16)1				ID-Name
Do Not Disturb (F 01)				DND
Privacy (F 07)				Priv
VMS Cover (F 15)				VMSCover
Voice Interrupt on Busy Talk-Back (F 18)				VIOB
Account Code Entry (F 12)3				ACE
Background Music (F 19)3				Music			1. PARTNER
								II system
Call Coverage (F 20 XX XX)		1,3,5		Cover-XX XX
								only.
Call Forwarding/CalllFollow-Me		(F 11 XX		XX)3,5 CF-XX XX	2.			Requires
								Auto Dial
Call Park (I XX)4				Park
								button for
Call Pickup (I 6 XX)				Pickup-XX				each
								extension.
Conference Drop (F 06)				Drop	3.
								Button with
Direct Line Pickup-Active Line		(I 68)		DLPA				lights is
								recom-
Direct Line Pickup-idle Line (I 8)				DLPI
								mended, but
Exclusive Hold (F 02)				ExHold		4.		not required.
								Extension
Fax Management (I XX)	3			FAX-XX
								number can
Group Calling-Ring/Page (I 7 G or I *7 G)				GCall-g				be pro-
								grammed
Group Hunt-Ring/Signal (I 77 G or I *77 G)				Hunt-g
								as Auto Dial
Group Pickup (I 66 G)				P/U Grp-g				button.
					5.			You can
Intercom Autodial (I XX or I		XX)	3	Ext-XX
								program the
Last Number Redial (F 05)				LNR
								origination
								extension
Loudspeaker Paging (I 70)				Loudspk
								only or both
Manual Signaling (F 13 XX or F 13 *XX)3				MS-XX				the
Message Light Off (F 10 XX)6				MsgOff-XX				origination
								and
Message Light On (F 09 XX)6
				MsgOn-XX				destination
Recall (F 03)				Recall		6.		extension.
								You can
Save Number Redial (F 04)				SNR
								program the
								extension
Simultaneous Paging (I * 70)				SPage
								number.
Station Lock (F 21)3				Lock
Touch-Tone Enable (F 08)				TT-EN
Voice Mail Messages Button (I 777)				VMMsgs-777
Voice Mailbox Transfer (F 14)				VMBox

F = Feature button G = Group I = Left Intercom button XX = Extension