Form C4 PARTNER-6 Phone, Ms-Xx | Lucent Technologies 4.1 instruction

Lucent Technologies

Bell Labs Innovations

Form C4: PARTNER-6 Phone

Make as many copies as you need. Use template and/or checklist. For additional instructions, see page 8.

PAGE 4 of 8

●If desired, write in line number, pool access code, dial code feature, or auto dial number

●If desired, write in Line Ringing (Imm, Del, or No) from Form B2

●If desired, write in Line Access Restriction or Pool Access Restriction (Out, In, or No) from Form B2

*For PARTNER II systems in Hybrid mode only, if pool 880 is assigned, these two buttons are associated with this pool.

Specify Automatic Line Selection:

Identify extensions programmed as shown:

	Do Not Disturb (F 10)	DND
	Privacy ( F 07)	Priv
	VMS Cover (F 15)	VMSCover
	Voice Interrupt on Busy Talk-Back (F 18)	VIOB
	Account Code Entry (F 12)1	ACE
	Background Music (F 19)1 ✔	Music
	Call Coverage (F 20 XX XX)1,2,3 ✔	Cover-XX XX
	Call Forwarding/Call Follow-Me (F 11 XX XX)1,3 CF-XX XX
	Call Park (I XX)4	Park
	Call Pickup (I 6 XX)	Pickup-XX
	Conference Drop (F 06)	Drop
	Direct Line Pickup-Active Line (I 68)	DLPA
	Direct Line Pickup-Idle Line (I 8)	DLPI

	Exclusive Hold (F 02)	ExHold
	Fax Management (I XX)1	FAX-XX
	Group Calling-Ring/Page (I 7 G or I *7 G)	GCall-g
	Group Hunt-Ring/Signal (I 77 G or I *77 G)	Hunt-g
	Group Pickup (I 66 G)	P/U Grp-g
	Intercom Autodial (I XX or I *XX)1	Ext-XX
	Last Number Redial (F 05)	LNR
	Loudspeaker Paging (I 70)	Loudspk
	Manual Signaling (F 13 XX or F 13 *XX)1	MS-XX
	Message Light Off (F 10 XX)5	MsgOff-XX
	Message Light On (F 09 XX)5	MsgOn-XX
	Recall (F 03)	Recall
	Save Number Redial (F 04)	SNR
	Simultaneous Paging (I * 70)	SPage
	Station Lock (F 21)1	Lock
	Touch-Tone Enable (F 08)	TT-EN
	Voice Mail Messages (I 777)	VMMsgs-777
	Voice Mailbox Transfer (F 14)	VMBox

F = Feature button G = Group I = Left Intercom button L = Line XX= Extension

1.Button with lights is recommended, but not required.

2.PARTNER II system only.

3.You can program the origination extension only or both the origination and destination extension.

4.Extension number can be programmed as Auto Dial button.

5.You can program the extension number.