Ext Write Return Jack Other | Lucent Technologies 4.1

Form B1: System Extensions

2 of 4

PAGE

Lucent Technologies

Required for PARTNER II System extensions 34 through 57.

Bell Labs Innovations

For additional instructions, see page 5.

Idenitify Telephone

Identify Auxiliary Equipment

Attached to this Extension

Write

Transfer

Ext.

Write in

Return

Jack

Other

Ext. No.

No.

Write Name/Description

Equipment

{#306}

1.If checked, see Form B1, Page 4 of 4

2.If there is a mix of PARTNER-model and MLS-model phones, write “P” for PARTNER and “M” for MLS.

3.Write “T” for touch-tone or “R” for rotary. If Call Waiting is desired, check next column.

4.Must be standard phone. If immediate dialing is required, use a dedicated line. Do not assign restrictions that prevent dialing the outside number, Forced Account Code Entry {#307}, or groups. Also see Form D, External Hotline {#311}.

5.Standard phone is recommended. Write extension number of corresponding alert extension or “70” for loud- speaker paging system in next column.

6.Also write Transfer Return Ext. No. {#306} on this form (usually extension 10). Also see Form B2, Identify Group Assignments, VMS Only.

7.To prevent other extensions from interrupting calls, assign Automatic Extension Privacy {#304} on Form B2.

8.Check corresponding alert extensions in next column. To prevent outside calls, remove all outside lines-see Lines/Pools Not Assigned on Form B2.

9.Also write Transfer Return Ext. No. {#306} on this form.

Lucent Technologies 4.1 manual Required for Partner II System extensions 34 through

Models: 4.1