Installation Instructions
The PARTNER Voice Messaging PC Card is used with PARTNER Advanced Communications System processor module Release 1.1 or later (available separately). The processor module uses PC cards for backup or restore functions, for software upgrades, for Automatic System Answer/Direct Extension Dialing (ASA/DXD) functions, as well as for PARTNER Voice Messaging. Make sure that you have the required PARTNER Voice Messaging PC Card and PARTNER ACS Release 1.1 or later before beginning these installation procedures. If you are using Release 1.0 of the Partner ACS processor module, you will need to upgrade to Release 1.1 or later before you can install the PARTNER Voice Messaging PC Card. Contact your Lucent Technologies Representative, or your local Authorized Dealer.
Important Safety Instructions
Always follow these basic safety precautions when using this product:
1.Read and understand all instructions.
2.Follow all warnings and instructions marked on the product.
3.Do not drop, bend, or crush the card.
4.Keep the card away from moisture, high temperatures, and direct sunlight.
5.Keep the connector on the card clean.
!
CAUTION:
Before starting, verify that you have batteries installed in the PARTNER ACS processor module (If extension 10 shows the ReplaceSysBat W/Power On message in the display, replace the batteries without turning off the system.)
!
CAUTION:
To avoid damage to the PARTNER ACS processor module or to the card, do not install or remove the card when power is on.
1. Power down the PARTNER Advanced Communications System before inserting or removing the PARTNER Voice Messaging PC Card.
A) If you have a
12
