32
Line Coverage Extension (#208)
To assign line coverage for the extension numbers specified in the VMS-Mail
column on Form A, Page 1, Line Coverage:
1. Press #208.
2. At the Line: prompt, enter t he first line for which an extension is specified
in the VMS-Mail column of Form A, Page 1, Line Coverage.
3. At the Data: prompt, enter the number of the extension specified in the
VMS-Mail colu mn.
4. To program another line, press n or p until the app ropriate line
number displays.
5. Repeat Steps 3 and 4 for eac h VMS-Mail line for which an extension num -
ber is written on Form A.
6. Continue with the next section, “Automatic VMS Cover.”
Automatic VMS Cover (#310)Check Form B2 to see if Automatic VMS Cover is assigned to any extensions.
If it is, follow the procedure below. If not, skip to “VMS Cover Rings.”
To change the Automatic VMS Cover setting for an extension to Assigned as
indicated on Form B2:
1. Press #310.
2. Enter the number of the first extension to which Automatic VMS Cover is
to be assigned.
3. Press D until the display reads 1 Assigned.
4. To program another extension, press n or p until the ex tension
number shows on the disp lay.
5. Repeat Steps 3 and 4 for each extension to which Automatic VMS Cover
is to be assigned.
6. Continue with “VMS Cover Rings” below.