4.Enter specific programming procedure codes.
You must program the following for every new installation:
■VMS Hunt Group (Hunt Group 7) Extensions (#505)
■Transfer Return Extensions (#306)
You may also need to program the following:
■Line Coverage
—Group Call Distribution (#206)
—Line Coverage Extension (#208)
■Automatic VMS Cover (#310)
■VMS Cover Rings (#117)
■Telephone Button Programming
VMS Hunt Group Extensions (#505)
You must use this procedure to assign virtual extensions 78 and 79 associated with PARTNER Voice Messaging to Hunt Group 7. This Hunt Group, which is called the VMS Hunt Group, is used exclusively for PARTNER Voice Messaging.
To assign virtual extension 78 and 79 to Hunt Group 7:
1.Press #505.
2.At the Group: prompt, press 7.
3.At the Extension: prompt, enter 78for the first virtual extension num- ber assigned to PARTNER Voice Messaging as shown on form B1.
4.Press Duntil the display reads 1 Assigned.
5.Press nto display extension 79 (the second virtual extension num- ber assigned to PARTNER Voice Messaging as shown on form B1).
6.Press Duntil the display reads 1 Assigned.
7.Continue with “Transfer Return Extensions” on the next page.
29
