Lyngdorf Audio TDA 2200 owner manual Press enter to continue

The saved calibration volume from the guided set-up is used as a default when adding extra focus/listening and room positions though, as mentioned, the volume can be changed at any time between measurements to suit a particular situation.

After a successful measurement the following message is displayed. The value of Roomknowledge can be different.

Press enter to continue.

Choose Yes to save the measurement or choose No to exit without saving the current measurement.

Choose between focus/listening position presets 2 - 8 and press enter. If you wish to overwrite an existing focus filter (2 to 8 can be overwritten) or you are trying to save a new filter on an existing preset then the following will be displayed.

When the preset number has been chosen, the volume turns down to default or lower and the new focus filter is calculated and saved.

30