b. Operating Voltage
The TDA 2200 is available in two versions: one for 115V mains voltage and another for 230V mains voltage.
Check the label on the TDA 2200 rear panel and verify you have the version with the proper voltage for your area.
The 115V version requires a mains voltage of
The 230V version requires a mains voltage of
The mains voltage setting for your TDA 2200 can be changed ONLY BY A QUALIFIED ENGINEER.
WARNING: Connect the power input only to the AC source printed on the label. The warranty will not cover any damage caused by connecting to the wrong type of AC mains.
The TDA 2200 has three power modes:
1.OFF – No circuitry is powered.
2.STANDBY – The mains transformer and amplifier section are powered off - only the remote control input and the microprocessor is powered, so the unit can be powered up using the remote control “STANDBY” button
3.ON – All circuits active
3.Product Registration
Please record the serial number of your amplifier here for future reference. The serial number is printed on the label on the TDA 2200 rear panel. You will need this serial number, should you ever require service for your TDA 2200 amplifier.
TDA 2200 serial number: _____________________
8
