Lyngdorf Audio owner manual Front Panel, a. Controls, TDA 2200 front panel

5. Front Panel

Fig 1: TDA 2200 front panel.

a. Controls

The buttons/controls on the front panel of the TDA 2200 can all be operated either with direct presses or by operating the corresponding keys on the supplied remote control. All the keys on the front panel [except the Mains switch (1)] are duplicated on the remote control as well.

Mains switch (1)

Powers the TDA 2200 on/off.

Stand-by mode is selected by pressing the mute button (2) for 3 seconds or with the stand- by button on the remote control.

Mute (2)

Toggles Mute mode on/off. The Volume level indicator will change to “---“ when the outputs are muted. If the volume control is changed while muted the present volume control setting will be shown before reverting to “---”, but the outputs remain muted.

Pressing the Mute button for 3 seconds will set the TDA 2200 in stand-by mode.

Analog Input selector (3)

Changes to Analog input, or if already selected, cycles to the next Analog input.

Digital Input selector (4)

Changes to Digital input, or if already selected, cycles to the next Digital input.

Display (5)

Display with all information on menu system, status, active input selection and volume control.

Volume wheel (6)

Optical encoded volume control wheel

Navigation keys (7)

Keys for operating the menu system: Up/Down, Left/Right & Enter

Menu button (8)

Toggles Menu mode on/off

10