Magnavox H2160MW9 A owner manual Hint, To stop the timer recording in progress

	TIMER RECORDING
	How to select a channel number for the timer recording
Analog TV	For channel number 2-6 press, press [B] or [ • ] to decide the channels. For other channels (7-69),
	the channel will be decided as soon as you enter the channel number.
Analog CATV	For channel number 1-12 press, press [B] or [ • ] to decide the channels. For other channels (13-
	125), the channel will be decided as soon as you enter the channel number.
Digital TV	For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99),
	the channel will be decided as soon as you enter the channel number.
Digital CATV	For channel number 1-13 press, press [B] or [ • ] to decide the channels. For other channels (14-
	135), the channel will be decided as soon as you enter the channel number.
minor channels	For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99),
	the channel will be decided as soon as you enter the channel number.

<Hint>

•You can decide the 1-digit channel number by pressing 0 first , then enter desired 1-digit channel number. e.g.) “5”: [0]+[5]

•For selecting the channels with [K / L] you need to press [B] or [ • ] to decide the channel number.

•For selecting the minor channels with [K / L], please make sure the minor channel your are selecting is existed. [K / L] does not skip the non-existed minor channels.

To stop the timer recording in progress

1)Press [STOP C] on the remote control.

2)Confirmation message will appear. Select “Yes”, then press [OK].

•To stop the timer recording immediately, press [C STOP ] on the unit.

Checking, canceling, or correcting the timer programming information

1)Press [TIMER].

2)Check the information.

Timer Programming

FEB/20/09 10:30 AM 69.1 SP
SP (1:00)		THU FEB/19 11:30AM
Date	Start	End	CH
FEB/20	10:30AM 11:30AM		DTV69. 1
	New Program

3-A) To delete the timer program:

1 Use [K / L] to select the program you want to delete, then press [OK].

2 Use [K / L] to select “Delete”, then press [OK].

Confirmation window will appear.

3 Use [K / L] to select “Yes”, then press [OK].

3-B) To correct the timer program:

1 Use [K / L] to select the program you want to correct, then press [OK].

2 Use [K / L] to select “Program Change”, then press [OK].

3 Correct the timer program by using [K / L / { / B], then press [OK].

4) Press [TIMER] to exit.

Note

•Press [TIMER] to check the timer recording in progress.

•As to the timer recording in progress (which is shown in red in the timer program list), you only can edit the end time. The changes made during recording will be recognized as only specific to that recording in progress and it will not affect the daily or the weekly recording setting.

If the timer program did not complete correctly, the error number appears in the timer programming list.

Timer Programming
		FRI FEB/20 1:00PM
Date	Start	End	CH
E41 FEB/20	10:30AM 11:30AM		DTV69. 1
	New Program
Each error number means:

E1-22	Recording error other	E44	Already 254 chapters
E37-39	than below		recorded
E24	Unrecordable disc	E45	Copy prohibited
E25-26	Copy prohibited		program
	program	E46	It is impossible to
E29	Disc protected		record additionally
			on a disc recorded
E30	Disc full		by other units
E35	PCA full *1		when setting “
			Make Recording
E36	Already finalized		Compatible” to “OFF”.
	video format disc	E47	Already 600 titles
E40	Some portion has		recorded on the HDD
	not been recorded	E49	There was no disc
	because of program		space on the HDD
	overlapping.		at the starting time
	Recording did not		for the HDD timer
	start at the start time.		recording.
E41	Power failed	E50	HDD recording is
E42	No disc when		canceled due to the
			insufficiency of the
	recording
			disc space on the
E43	Already 49 titles		HDD.
	recorded

•E23, E27, E28, E31, E32, E33 and E34 are not displayed.

•A program with the error number is grayed in the timer programming list.

•Timer program with an error number will be cleared

once the entry screen for the program is displayed.

*1 PCA is a disc's space reserved for recording test.

48 EN