RDV4136 Series Direct Vent Gas Fireplace
Installation of Logs, Lava Rock & Ember Material
The logs are fragile and should be handled with care. Keep the packaging material out of the reach of children and dispose of the material in a safe manner.
Log Installation
1.Open the log box and remove each log from its packaging material. Set aside the ember material and the lava rock bags.
As with all plastic bags - these are not toys and should be kept away from children and infants.
2. Place the rear log on the rear log support. Place the holes in the bottom of the log over the locator pins on the rear log support. (Fig. 39)
Locator Pins 
Log Identification Chart
Logs | Part # |
Rear Log | 10010626 |
Left Front Log | 10010629 |
Right Front Log | 10010630 |
Left Cross Log | 10010627 |
Right Cross Log | 10010628 |
Figure 39
Rear Log Support | Locator Pins |
|
Figure 40
Left Front
Log
LG516
Right
Front
Log
3.Place the left front log on the left side of burner. (Fig. 40) Place the holes in the bottom of the log over the front left locator pins on the burner. (Fig. 39)
4.Place the right front log. Place the two holes in the bottom of the log over the locator pins on
LG517 | the left burner housing |
| bracket. (Fig. 40) |
22 | 10010618 |
