Figure 41
5.Place ember material on top of front burner. (Fig.
41) Separate the ember material into small pieces approximately 1/2” (13 mm) diameter and keep 1/2” (13 mm) space between the ember pieces.
6.Rest the bottom edge of the left cross log on the bracket. Rest the top of the long on the top of the back log.
7.Place the right cross log. Place the bottom rectangu- lar slot of this log on the bracket. Rest the top portion of the cross log on top of the rear log. (Fig. 42)
8.Place large lava rock onto the two sides and front of the burner tray. (Fig. 42)
CAUTION: Do not place any lava rock mate- rial on the burner housing assembly.
Figure 42
Left Front Log
RDV4136 Series Direct Vent Gas Fireplace
LG518
Ember Material
Left Cross Log
Right Cross Log
Rear Log
Right
Front
Log
LG519
Lava Rock
10010618 | 23 |
