RDV4136 Series Direct Vent Gas Fireplace
Ceramic Refractory Panels
Ceramic refractory panels are available for the RDV4136 fireplace.
Kit | Color |
RDV4136CRS | Sandstone |
RDV4136CRR | Colonial Red |
Take care when handling the refractory panels as they are fragile until held in place and supported.
Installation, refer to Figures 60& 61
Turn unit off and allow to cool completely if it has been in operation.
1.Remove valve access panel.
2.Remove the front window frame assembly.
3.Remove logs.
4.Place the rear refractory panel in place. Locate the lower edge of the panel in the ledge formed by the top of the rear log support.
Rear Refractory
Panel 
Firebox Back Panel
Rear Panel Sup- port Brackets
Rear Log
Support
FP1232
Fig. 60 Rear refractory panel installation.
5.Remove the three (3) screws securing the ‘deflector front’ to the combustion dome.
6.Slide the side refractory panels into place to hold the rear panel secure. Repeat the procedure on the other side.
7.Replace the ‘deflector front’.
Installation complete.
Porcelain Steel Back
An optional black porcelain liner is available for the RDV4136 fireplace.
KitColor
RDV4136FLBBlack
These panels line the inside of the firebox just as the ceramic panels. Follow the installation instructions for the ceramic panels to install the porcelain steel back.
| Remove Screws |
| Combustion |
| Deflector |
Side | Back Panel |
| |
Panel | Side |
| Panel |
Log Support
Burner Tray
FP1848
Fig. 61 Ceramic panel installation.
Remote Controls
Optional remote control units are available to control dif- ferent functions of the appliances. RN/RP models only.
Model | Function(s) Controlled |
RC1 | ON/OFF |
RC2 | ON/OFF and temperature |
IMTFK | Wall mounted thermostat control |
Trim Kits
Georgian Trim Kit |
|
41DVSGTKCB | Classic Black |
41DVSGTKB | Ebony |
Medium Trim Kit |
|
Black | |
Screen Door Kit |
|
RDV4136SDK | Black |
Back-up Battery Kit
All models: DVTBBK
Follow instructions provided with the kit for installation.
38 | 10010618 |
