Manitowoc Ice 11M Section Installation, General, Unpacking And Inspecting, Kit assembly includes

Section 2

Installation

General

UNPACKING AND INSPECTING

Carefully inspect the refrigeration unit immediately upon unpacking. Verify the equipment and parts received against the Bill of Lading. Locate all items according to packing list and inspect for possible damage caused by shipping. Notify the appropriate carrier if necessary and contact MBE immediately for replacement of parts if discrepancies exist.

1.The Multiplex A&W Model 11 Refrigeration Unit is pre-assembled in the factory and requires minimum installation. Locate the following parts supplied with the unit.

Kit assembly includes:

-Tab clamps for conduit, syrup, and water coils.

-Bracket for drain hose and screws for mounting

-6 ft (182.9 cm) drain hose

-Six (6) Adapter 1/2” Barb x 1/2” OD Tube

-Twelve (12) Adapter 3/8” Barb x 1/2” OD Stem

-One (1) Adapter 3/8” MPT x 1/2” OD Stem

2.Locate any of the optional Kit Assembly for mounting to match the type of mounting required. Install the kit as noted in the instructions supplied.

3.Record the Model Number, Serial Number and date of installation for future reference, or to be used when ordering parts.

Part Number 020001552 5/11 2-1