Contents | Connections | Playback | Settings | Tips | Appendix |
HDMI control function
A recent addition to the HDMI standard is CEC (Consumer Electronics Control), which allows control signals from one device to communicate with another device via the HDMI cable connection.
Setting procedure
1Enable the HDMI control function of this unit.
Set “HDMI Control” (v p. 164) to “On”.
2Turn the power on for all the devices connected by HDMI cable.
3Set the HDMI control function for all devices connected by HDMI cable.
0Please consult the operating instructions for the connected devices to check the settings.
0Carry out steps 2 and 3 should any of the devices be unplugged.
5Switch the input source of this unit to check that video from the player connected by HDMI is played back correctly.
6When you turn the TV’s power to standby, check that the power of this unit also goes to standby.
NOTE
Some functions may not operate depending on the connected TV or player. Check the owner’s manual of each device for details beforehand.
4Switch the television input to the HDMI input connected to this unit.
Front panel | Display | Rear panel | 128 | Remote | Index |