Contents | Connections | Playback | Settings | Tips | Appendix |
|
|
|
|
|
|
oDynamic Compression
Compress dynamic range (difference between loud and soft sounds).
Auto: | Automatic dynamic range compression | |
on/off control according to source. | ||
| ||
Low / Medium / High: | These set the compression level. | |
Off: | Dynamic range compression is always off. |
0“Auto” can only be set when Dolby TrueHD signals are input.
0The default setting is “Off”. When the input signal is Dolby TrueHD source, the default setting is “Auto”.
oLow Frequency Effects
Adjust the low frequency effects level (LFE).
For proper playback of the different sources, we recommend setting to the values below.
0Dolby Digital sources : 0 dB
0DTS movie sources : 0 dB
0DTS movie sources:
Front panel | Display | Rear panel |
oCenter Image
Distributes the dialogue output from the center channel to the front left and right channels and widens the sound image in the front.
0.0– 1.0 (Default : 0.3)
0You can set this when the sound mode is DTS Neo:6 in the “Music” mode.
0The smaller the value, the more dialogue is concentrated on the center channel. The larger the value, the more dialogue is distributed to front left and right channels, and the more the sound image widens in the front.
oPanorama
The front sound field is expanded further towards the back to create a seamlessly inclusive sound impression.
On: | Use “Panorama”. | |
Off | Do not use “Panorama”. | |
(Default): | ||
|
You can set this when the sound mode is Dolby PLg/gx in the “Music” mode.
151 | Remote | Index |