Contents | Connections | Playback | Settings | Tips | Appendix |
oHDMI Control
You can link operations with devices connected to HDMI and compatible with HDMI Control.
On: | Use HDMI control function. | |
Off | Do not use HDMI control function. | |
(Default): | ||
|
0Please consult the operating instructions for each connected device to check the settings.
0Refer to “HDMI control function” for more information about the HDMI control function. (v p. 128)
NOTE
If the “HDMI Control” settings have been changed, always reset the power to connected devices after the change.
oPass Through Source
Sets the HDMI connector that inputs HDMI signals when in standby.
Last:The most recently used input source will go into standby mode.
CBL/SAT / DVD /
AUX1 / AUX2 / Pass through the selected input source.
Media Player / CDz
(Default : CBL/SAT):
z“Pass Through Source” can be set when any of the HDMI connectors is assigned to “CD” for the input source in the “Input Assign” setting. (v p. 172)
“Pass Through Source” can be set when “HDMI Control” is set to “On” or “HDMI Pass Through” is set to “On”.
Front panel | Display | Rear panel | 164 | Remote | Index |
