Marantz NR1605 owner manual Settings

Contents Connections Playback Settings Tips Appendix

Settings

Configure the proxy settings and IP address.

0If you are using a broadband router (DHCP function), the information required for network connection such as the IP address will be automatically configured since the DHCP function is set to “On” in the default settings of this unit.

0Set up the IP Address, Subnet Mask, Default Gateway and DNS server information only when assigning a fixed IP address or when connecting to a network without DHCP function.

0Configure the proxy settings when using a proxy server to connect to the Internet.

Network/Settings
DHCP
	Off
-IP Address	192.168.000.001
-Subnet Mask	255.255.255.000
-Default Gateway	255.255.255.000
-Primary DNS	000.000.000.000
-Secondary DNS	000.000.000.000
Proxy	Off
-Address	000.000.000.000
-Port	00000

Save

Cancel

Configures the network settings manually

oIP Address

Set the IP address within the ranges shown below.

0The Network Audio function cannot be used if other IP addresses are set.

CLASS A:10.0.0.1 - 10.255.255.254 CLASS B:172.16.0.1 - 172.31.255.254 CLASS C:192.168.0.1 - 192.168.255.254

oSubnet Mask

When connecting an xDSL modem or connector adapter directly to this unit, input the subnet mask indicated in the documentation supplied by your provider. Normally input 255.255.255.0.

oDefault Gateway

When connected to a gateway (router), input its IP address.

oPrimary DNS, Secondary DNS

If there is only one DNS address indicated in the documentation supplied by your provider, input it at “Primary DNS”. If two or more DNS are provided by your provider, enter both “Primary DNS” and “Secondary DNS”.

oDHCP

Selects how to connect to the network.

On	Configure the network settings
(Default):	automatically from your router.
Off:	Configure the network settings manually.

Front panel Display Rear panel 197 Remote Index