Marantz NR1605 oSpeaker Selection, oCurve Copy, oSet Defaults, oAdjust EQ, Contents, Connections

Contents Connections Playback Settings Tips Appendix

oSpeaker Selection

Select whether to adjust tones for individual speakers or for all speakers.

All:	Adjust all speaker tones together.
Left/Right	Adjust the left and right speaker tones
(Default):	together.
Each:	Adjust the tone for each speaker.

oCurve Copy

Copy the flat correction curve created in the Audyssey® Setup.

“Curve Copy” is displayed after Audyssey® Setup has been performed.

oSet Defaults

The “Graphic EQ” settings are returned to the default settings.

oAdjust EQ

Adjust tonal balance for each frequency band. Adjust the speaker selected in “Speaker Selection”.

1.Select the speaker.

2.Select the adjustment frequency band.

63 Hz / 125 Hz / 250 Hz / 500 Hz / 1 kHz / 2 kHz / 4 kHz / 8 kHz / 16 kHz

3.Adjust the level.

–20.0 dB – +6.0 dB (Default : 0.0 dB)

Front panel Display Rear panel 159 Remote Index