Marantz NR1605 ZONE2 Setup, oVolume Limit, oLch Level, oRch Level, oVolume Level, Contents, Tips

Contents Connections Playback Settings Tips Appendix

ZONE2 Setup

Configure the settings for audio playback on ZONE2.

Values set for “Volume Limit” and “Power On Volume” are displayed according to the setting specified for the volume “Scale” (v p. 155).

oVolume Limit

Make a setting for maximum volume.

60 (-20 dB) / 70 (-10 dB) / 80 (0 dB) (Default : 70 (-10 dB))

Off: Do not set a maximum volume.

oLch Level

Adjust the left channel output level. -12 dB – +12 dB (Default : 0 dB)

oRch Level

Adjust the right channel output level. -12 dB – +12 dB (Default : 0 dB)

oVolume Level

Set the volume output level.

Variable	Volume can be adjusted.
(Default):
1 – 98	Volume is fixed at the desired level. The
	volume cannot be adjusting using the remote
(–79.5 dB – 18.0 dB): control unit.

This can be set when “Volume Level” is set to “Variable”. (v p. 203)

oPower On Volume

Define the volume setting that is active when the power is turned on.

Last	Use the memorized setting from the last
(Default):	session.
Mute:	Always use the muting on condition.
1 – 98	The volume is adjusted to the set level.
(–79.5 dB – 18.0 dB):

This can be set when “Volume Level” is set to “Variable”. (v p. 203)

Front panel Display Rear panel 203 Remote Index