![9Repeat step 8, measuring positions 3 to 6.](/images/new-backgrounds/18159/18159361x1.webp)
Contents | Connections | Playback | Settings | Tips | Appendix |
|
|
|
|
|
|
8Move the Sound calibration microphone to position 2, select “Continue”, then press ENTER.
The measurement of the second position starts. Measurements can be made in up to six positions.
Audyssey Setup
Place the microphone ear level at the 2nd listening position, which should be no more than 2 ft (60cm) away from the 1st position, then select “Continue”...
Ear Height
Back | Complete | Continue |
To skip measuring the second and subsequent listening position, press o to select “Complete” and press ENTER to proceed to step 11.
9Repeat step 8, measuring positions 3 to 6.
10 Select “Complete”, then press ENTER.
Audyssey Setup
Measurements complete.
Select Continue to analyze the data...
Repeat Last Test | Continue |
Start the analysis and storage of the measurement results.
0Analysis takes several minutes to complete.
The more speakers and measurement positions that there are, the more time it takes to perform the analysis.
nStopping Audyssey® Setup
A Press BACK to display the popup screen. B Press o to select “Yes”, then press ENTER.
NOTE
When the measurement results are being saved, make sure the power is not turned off.
Front panel | Display | Rear panel | 181 | Remote | Index |