Contents | Connections | Playback | Settings | Tips | Appendix |
Audyssey
Set Audyssey MultEQ®, Audyssey Dynamic EQ® and Audyssey Dynamic Volume®. These can be selected after Audyssey® Setup has been performed.
For additional information on Audyssey technology, please see “Explanation of terms” (v p. 248).
0“MultEQ®”, “Dynamic EQ” and “Dynamic Volume” settings are stored for each input source.
0When the sound mode is in the “Direct” or “Pure Direct” mode, “MultEQ®”, “Dynamic EQ” and “Dynamic Volume” settings cannot be configured.
oMultEQ®
MultEQ® compensates for both time and frequency characteristics of the listening area based on “Audyssey® Setup” measurement results. Selection is done from three types of compensation curves. We recommend the “Reference” setting.
Reference | Selects the default calibrated setting with | |
a slight roll off at high frequencies, which | ||
(Default): | ||
is optimized for movies. | ||
| ||
L/R Bypass: | Selects the reference setting, but | |
bypasses MultEQ® on the front left and | ||
| right speakers. | |
| Selects the calibrated setting which is | |
Flat: | optimized for small rooms where your | |
listening position is closer to the | ||
| speakers. | |
Off : | Do not use “MultEQ®”. |
When using headphones, “MultEQ®” is automatically set to “Off”.
Front panel | Display | Rear panel | 156 | Remote | Index |
