Marantz NR1605 Levels, oTest Tone Start, oSet Defaults, Contents, Connections, Playback, Settings

Contents Connections Playback Settings Tips Appendix

Levels

Set the volume of the test tone to be the same at the listening position when it is output from each speaker.

oTest Tone Start

A test tone is output from the selected speaker.

While listening to the test tone, adjust the volume output from the selected speaker.

–12.0 dB – +12.0 dB (Default : 0.0 dB)

0The set “Levels” are reflected in all sound modes.

0If you wish to adjust the channel level for each input source, carry out the settings in “Channel Level Adjust” (v p. 111).

0When headphones are connected to the PHONES connector on this unit, you cannot set “Levels”.

oSet Defaults

The “Levels” settings are returned to the default settings.

Front panel Display Rear panel 190 Remote Index